AltLab opening with paper arduinos

We are happy to intro­du­ce the paper­dui­no  😀

This Tues­day AltLab had its first public ses­si­on and we did a mini workshop on “paper­dui­nos”, a new gene­ra­ti­on of card­bo­ard ardui­nos. We had lots of fun and have many more ide­as we’d like to try: dif­fe­rent layouts, colo­red papers, and other mate­ri­als. More info soon.

openMaterials :: research project

openMaterials
My dear fri­end Kisty Boy­le and I recen­tly laun­ched open­Ma­te­ri­als — a col­la­bo­ra­ti­ve rese­ar­ch pro­ject dedi­ca­ted to open inves­ti­ga­ti­on and expe­ri­men­ta­ti­on with DIY pro­duc­ti­on methods and uses of mate­ri­als. In the spi­rit of the open sour­ce soft­ware and hard­ware move­ments, we hope to pro­mo­te mate­ri­als to be rese­ar­ched and deve­lo­ped in a public, col­la­bo­ra­ti­ve man­ner. We see mate­ri­als as an open resour­ce, and wish to esta­blish an open pro­cess for explo­ring and sha­ring kno­wled­ge, tech­ni­ques and appli­ca­ti­ons rela­ted to mate­ri­als sci­en­ce.

I’ll be con­duc­ting most of my hands-on rese­ar­ch right here at AltLab. We’d love for you to be invol­ved if you are wor­king in the­se are­as or inte­res­ted in lear­ning more about smart mate­ri­als.

Paper and cardboard circuits

papercircuits_01
A cou­ple of years ago i found out on the “inter­nets” that you don’t really need a pro­to­bo­ard or a cir­cuit board to make your cir­cuits come to life, the idea was to fold a pie­ce of paper with the cir­cuit design in it (com­po­nent side and cir­cuit dia­gram side) and then inser­ting a pie­ce of card­bo­ard in the mid­dle.

The main idea was the eco, recy­cled “thingy” sin­ce cir­cuit boards are not so eco fri­en­dly and take a bun­ch of time to get recy­cled by our mother earth, also the eco­no­mic side (paper and card­bo­ard are almost free), ins­te­ad cir­cuit boar­ding takes a long time and it’s hazar­dous for the envi­ron­ment.

papercircuits_02
So here’s what i do :

1- print the sche­ma­tic you want (be sure to inclu­de on the she­et of paper both sides of the sche­ma­tic (com­po­nent side and sche­ma­tic)

2-fold it (the idea is to fold whe­re the com­po­nent side meets the sche­ma­tic)

3-cut a pie­ce of card­bo­ard and insert it in the mid­dle of the she­et of paper

4-glue both sides on to the card­bo­ard (now you must have a beau­ti­full cir­cuit board made of card­bo­ard)

5-with a nee­dle pier­ce (com­po­nent side) all dril­ling holes into sche­ma­tic side

6-insert the com­po­nents (resis­tors, ic, capa­ci­ta­tor etc..)

7-turn it back (sche­ma­tic side) and start to sol­der (be sure to folow the tra­ces on the paper), the best way to do this is to sim­ply bend the leads of the com­po­nents and sol­der them together, if you have a lar­ge area were the lead is not long enough just use a wire or something simi­lar.

8-have fun